Procure Tools And Equipment - Cisco NCS 5700 Series Hardware Installation Manual

Procure Tools and Equipment

Figure 16: Airflow Direction
Procure Tools and Equipment
Obtain these necessary tools and equipment for installing the chassis:
• Number 1 and number 2 Phillips screwdrivers with torque capability to rack-mount the chassis
• 3/16-inch flat-blade screwdriver
• Tape measure and level
• ESD wrist strap or other grounding device
• Antistatic mat or antistatic foam
• A Torx T15 screwdriver, or the Torx T15 key to install adapters
• Grounding cable (6 AWG recommended), sized according to local and national installation requirements;
• Ground lug (1)
• Crimping tool large enough to accommodate the girth of the lug
• Wire-stripping tool
• (ANSI) Pair of 19-inch mounting brackets
• M4 screws to fix brackets (16)
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
24
the required length depends on the proximity of the switch to proper grounding facilities
Prepare for Installation