Table of Contents
Advertisement
TG6611_6612HK(e-e).book Page 34 Tuesday, May 24, 2011 3:18 PM
Useful Information
Caller ID
Problem
Cause/solution
Caller information is not
L You must subscribe to a Caller ID service. Contact your
displayed.
L If your unit is connected to any additional telephone
L If you use a DSL/ADSL service, we recommend connecting a
L Other telephone equipment may be interfering with this unit.
Caller information is slow
L Depending on your service provider/telephone company, the
to display.
L Move closer to the base unit.
Time on the unit has
L Incorrect time information from incoming Caller ID changes
shifted.
The name stored in the
L Edit the phonebook entry name to fit in 1 line of text (page 19).
phonebook is not fully
displayed while an outside
call is being received.
Liquid damage
Problem
Cause/solution
Liquid or other form of
L Disconnect the AC adaptor and telephone line cord from the
moisture has entered the
handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
34
service provider/telephone company for details.
equipment, remove and plug the unit directly into the wall jack.
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
Disconnect the other equipment and try again.
unit may display the caller's information at the 2nd ring or later.
the time. Set the time adjustment to "Manual" (off) (page 20).
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Advertisement
Table of Contents
