Table of Contents
Advertisement
TG6611_6612HK(e-e).book Page 22 Tuesday, May 24, 2011 3:18 PM
Programming
Sub-menu 1
Sub-menu 2
*7
Auto Talk
Line Setup
Dial Mode
Recall/Flash
*1, *9
Privacy Mode
*1
Base Unit PIN
*1
Repeater Mode
Register
Register H.set
Cancel Register
Power Failure
Language
Display
*1 If you program these settings using one of the handsets, you do not need to program the same
item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual". (Caller
ID subscribers only)
To use this feature, set the date and time first (page 12).
*3 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*9 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*10This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
22
Settings
–
1: On 0: <Off>
*1
1: Pulse 2: <Tone>
*1, *8
0: 900 msec.
1: 700 msec.
2: 600 msec.
3: <400 msec.>
4: 300 msec.
5: 250 msec.
*: 200 msec.
#: 160 msec.
6: 110 msec.
7: 100 msec.
8: 90 msec.
9: 80 msec.
–
1: On 0: <Off>
–
<0000>
–
1: On 0: <Off>
–
*10
–
–
1: <Auto> 0: Off
Code
+
#200
14
#120
12
#121
15
#194
–
#132
25
#138
25
#130
25
#131
25
#152
16
#110
12
Advertisement
Table of Contents
