Table of Contents
Advertisement
Installation and Startup Process
Table 2-1
Item
6.
Cisco Broadband Access Center for Cable Installation Guide 2.7
2-4
Installation and Startup Process (continued)
Description
Install and configure Network Registrar, if it is not already installed on your systems. We
recommend that you use Network Registrar 6.1.2.3 or higher. For more information, see the
Network Registrar Installation Guide.
•
When you install Network Registrar Local Cluster (LCCM), ensure that you:
Obtain a valid Network Registrar license key for local cluster.
a.
On all Network Registrar local cluster servers, install the BACC extensions for the
b.
product. For more information see the
Server" section on page
c.
Configure Network Registrar, including its extensions. Specifically, you need to
configure scopes, policies, client-classes, and scope selection tags. For more
information, see the
Network Registrar User's Guide.
Configure the syslog on the Network Registrar for alerts and debugging information.
d.
See the
"Configuring the Syslog Utility to Receive Alerts from BACC" section on
page
5-1.
Validate the installation by connecting to the administrative user interface and viewing
e.
the administrator's user interface. For more information, see the Cisco Broadband
Access Center for Cable Administrator's Guide.
•
When you install Network Registrar Regional Cluster (RCCM), ensure that you:
a.
Identify the master server for Network Registrar Regional Installation, which
administers all the configured CNR local clusters. This server can be Solaris or
Windows or Linux. However, we recommend that you have the Solaris Operating
System on the CNR Regional Server.
Obtain a valid central-cluster license key for the CNR Regional Server.
b.
After you install the BACC extensions for the product on all CNR local servers,
c.
replicate the local data into regional and pull the "Replica Address Space". For more
information see the Network Registrar User's Guide.
Alternatively, you can also create subnets, client-classes, policies, and so on at RCCM
d.
and push them to the required LCCM DHCP server. For more information, see the
Network Registrar User's Guide.
e.
Configure this CNR Regional CCM Server's IP address, port number, and login details
into the RDU defaults for IP Reservation support. For more information, see the Cisco
Broadband Access Center for Cable Administrator's Guide.
Network Registrar Release Version prior to 6.1 does not support Regional Cluster,
Note
Hence BACC's IP Lease Reservation Support feature cannot be used.
"Installing Extensions on a Network Registrar
3-3.
"Configuring Extensions" section on page
Chapter 2
Preparing to Install Components
3-5, and also see the
OL-19105-01
Advertisement
Table of Contents
