Streamax AD Plus2.0 User Manual page 5

AD Plus2.0 User Manual
Turn on Wi-Fi and GPS on your mobile phone before connecting the device with
the truck EasyCheck app.
After the AD Plus2.0 device is powered on, it will remain in AP mode within 2
minutes. Then, run the truck EasyCheck app on your mobile phone and tap
SEARCH. The screen listing the Wi-Fi hotspots found is displayed. During the first
login, the Wi-Fi hotspot is named after the encrypted chip number of the AD
Plus2.0. If the license plate number is changed, the hotspot name is the new license
plate number. Search for a Wi-Fi hotspot named after the encrypted AD Plus2.0
chip number or the license plate number you have entered. The login screen is
displayed.
On the login screen, enter the corresponding username and password. Default
username/password: admin/admin.
Tap LOGIN. The operation screen is displayed, as shown in the figure below.
Page 4 of 66