Streamax AD Plus2.0 User Manual page 17

AD Plus2.0 User Manual
with the actual installation method)
*Note:
Before clicking Next to start formal calibration, the driver shall sit in the normal
driving posture and look straight ahead.
8. Click Next to move on to the next step for automatic face calibration.
During calibration, make sure that the driver sits still according to normal driving
habits and posture and looks straight ahead.
In the process of side calibration, the intelligent algorithm will automatically learn
the driver's head deflection angle and the positions of feature data of the driver's
face. If the driver moves his head during the calibration, the calibration will restart
automatically.
*Note:
For installation on the left A-pillar, the right A-pillar, and the lateral side of the
countertop, the human face and the camera must form a certain angle to complete
the calibration.
For installation on the front side of the countertop, the human face must be in front
of the camera to complete the calibration.
The driver sits still and waits for the equipment to be calibrated automatically.
When the value of NUM reaches 301 in the mode of side installation and side
calibration (51 in the mode of front installation and front calibration), the calibration
frame turns from red to blue, and then the automatic calibration ends.
Calibration is ongoing:
Page 16 of 66