IKEA LAGAN 80509004 Manual page 43

ENGLISH
Setting and starting a programme
The Auto Off function
This function decreases energy consumption by
automatically deactivating the appliance when it
is not operating.
The function comes into operation:
• 15 minutes after the completion of the
programme.
• After 15 minutes if the programme has not
started.
Starting a programme
Caution! Do not remove the baskets from
the dishwasher before a wash cycle.
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance.
3. To select a desired programme, press the
related programme button.
The related programme indicator is on. The
display shows the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Starting a programme with delay start
1. Set a programme.
2. Press repeatedly until the display shows
the delay time you want to set (from 1 to
24 hours). The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is possible to
increase the delay time but not to change the
selection of the programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration.
After closing the door, the appliance continues
from the point of interruption.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to set
the programme and options again.
Press the on/off button to deactivate the
appliance. The delay start will be cancelled.
Cancelling the programme
Press the on/off button to deactivate the
appliance.
Or open the door to stop running the
programme, and wait a few seconds until the
appliance completely stops, then press the on/
off button. The programme will be cancelled.
Make sure that there is detergent in the
detergent dispenser before you start a new
programme.
End of the programme
1. Press the on/off button or wait for the Auto
Off function to automatically deactivate
the appliance. If you open the door before
the activation of Auto Off, the appliance is
automatically deactivated.
2. Close the water tap.
When the programme is completed the display
shows 0:00.
All buttons are inactive except for the on/off
button.
Positioning the upper basket
The upper basket can be re-positioned at
different heights to permit storage of dishes of
various sizes.
1. Slide the upper basket out of the appliance.
2. Re-attach the upper basket onto the upper
or lower rollers.
43