Advertisement
Available languages
Available languages
2
Overview
LED
Number
LED
1
Power
2
2.4G/5G
3
WPS
4
LAN 1-4
5
WAN
Ports/Buttons
Number
Ports/Buttons
6
7
8
9
Power Button
10
11
Note:
The illustrations in this document may appear di erent from your model.
ON - Device is powered on
OFF - Device is powered o
ON - Wireless link established and active
OFF - Wireless is turned o
Blink - Wireless packet being transmitted
OFF - Idle
Blink - WPS is being triggered
ON - LAN link established and active
OFF - No LAN Link
Blink - LAN ethernet packet being transmitted
ON - WAN link established and active
OFF - No WAN Link
Blink - WAN ethernet packet being transmitted
The WAN port is to connect to the broadband access
device. Usually connect to DSL / Cable modem, or to
WAN
network switch at home/ o ce
LAN 1-4
The LAN ports to connect local PC/Laptop to the router
Power
Power socket to connect the power adapter
Power ON / OFF SWITCH
Press this button for at least 3 full seconds and the
WPS
WPS LED will start blinking to start WPS
Press this button for at least 10 seconds to Reset
Reset
device to its default settings
Description
Description
EN2
Advertisement
