Installing Power Over Ethernet - Cisco 880 Series Installation Manual

Installing Power Over Ethernet

This section contains the following information:
•
•
Items Shipped
The PoE option includes a PoE card, which must be installed inside the router, and an external power
supply.
Table 2
Table 2
Item
PoE PCBA
48-V PoE power supply adapter
Power supply cable
Standoffs with two notches
Standoff with one notch
Screws
ESD wrist strap
Installation Procedure
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only through
the use of a special tool, lock and key or other means of security. Statement 1072
To install the power supply card, perform the following steps:
Ensure that the PoE power supply is not connected to the back of the router prior to installation of the
Caution
PoE card. Failure to do so may result in damage to the PoE card or to the router.
Open the chassis according to the instructions in
Step 1
Installing Memory and Power Over Ethernet in Cisco 880 Series and Cisco 890 Series Integrated Services Routers
OL-16194-01
Items Shipped
Installation Procedure
lists the items shipped with a PoE module.
Items and Their Quantities Shipped with a PoE Module
Quantity
1
1
1
2
1
3
1
"Opening the Chassis" section on page
Installing Power Over Ethernet
8.
5