Installation Procedure - Cisco 880 Series Installation Manual

Cisco systems integrated services router installation guide

Hide thumbs Also See for 880 Series:

Table of Contents

Installing Main Memory

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings,

Warning

necklaces, and watches). Metal objects will heat up when connected to power and ground and can

cause serious burns or weld the metal object to the terminals. Statement 43

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF

Warning

or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,

detach the end away from the unit first. Statement 1026

Installing Main Memory

This section contains the following information:

•

Items Shipped

Table 1

Item

Memory module

ESD wrist strap

Installation Procedure

To install a DIMM, follow these steps:

Step 1

Open the chassis according to the instructions in the

Step 2

Locate the DIMM socket on the system board. See

Installing Memory and Power Over Ethernet in Cisco 880 Series and Cisco 890 Series Integrated Services Routers

Items Shipped

Installation Procedure

shows the items shipped with a DIMM unit.

Items and Their Quantities Shipped with a DIMM Unit

Quantity

"Opening the Chassis" section on page 8

Figure 1

for the location of the DIMM socket.

OL-16194-01

Table of Contents