Table of Contents
Advertisement
The setup steps are as follows:
Check the "Enable address filtering" check box.
Select "Block/Allow the following address", IPv4/IPv6/MAC and then enter the
IP address or MAC address in the address box and click the "Add" button.
5.6.4 Security Management
Go to Config > Security > Security Management as shown below.
To prevent malicious password unlocking, the "locking once illegal login"
function can be enabled here. If this function is enabled, login failure after trying
six times will make the login interface locked. The camera can be logged in again
after a half-hour or after the camera reboots.
Password Security
Please set the password level and end time as needed.
Password Level: Weak, Medium, or Strong.
Weak level: Numbers, special characters, upper- or lower-case letters can be
used. You can choose one of them or any combination of them when setting the
password.
Medium Level: 9~15 characters, including at least two of the following categories:
41
Advertisement
Table of Contents
