IDEC SE4D Series Quick Instruction Manual page 35

<In case of using intermediate supporting bracket SE9Z-SED-2 (accessory)>
1. Loosen the hexagon-socket head bolt [M4 (length: 12mm)] screw of the intermediate
supporting bracket SE9Z-SED-2.
2. Insert the side of this device into the intermediate supporting bracket, and fix it with the
hexagon-socket head bolt [M4 (length: 12mm)]. The tightening torque should be 1.2N·m
or less.
This device
When setting the intermediate supporting bracket on both side surfaces of this device, fit
the four pits and projectiles of both side surfaces of the main body to those of both side
surfaces (inner surfaces) of the intermediate supporting bracket.
3. After aligning the beam axis, mount the intermediate supporting bracket to the mounting
surface using two hexagons-socket head bolts [M5 (purchase separately)].
Hexagon-socket head bolt
[M4 (Length: 12mm)]
Intermediate supporting racket
SE9Z-SED-2 (Accessory)
Fit the pits and projectiles of both side surfaces
of this device to those of both side inner sur-
faces of the intermediate supporting bracket.
This device
Hexagon-socket head
bolt (M5)
(Purchase separately)
35