Table of Contents
Advertisement
5. Mounting
● For selecting the appropriate mounting bracket matched to the installation environment,
the mounting bracket is not incorporated in this device. Please purchase the optional
mounting bracket to fit on the mounting environment.
● Do not apply the load such as forced bending to the cable of this device. Applying im-
proper load could cause the wire breakage.
● The minimum bending radius of the cable is R6mm. Mount the device considering the
cable bending radius.
In case mounting the mounting bracket after mounting the bottom cap cable and the series
connection cable, be sure drawing the cable to other side of the hexagon-socket head bolt
to prevent the cable from press by the bolt.
Good
<Reference>
Mount the emitter and the receiver at the same level and parallel to each other. The effective aperture
angle of this device is ±2 5° or less at a sensing distance of 3m.
34
CAUTION
CAUTION
Not good
Advertisement
Table of Contents
