Advertisement
Configuration
1. Configuring the Device Using the Web Browser
You can use a web browser running on your PC to access the router web interface. Here
you can perform router monitoring, configuration, and administration. First, connect the PC to
the default LAN interface described in the Ethernet chapter. To get the router interface, enter
the
https://192.168.1.1
protocol for secure communication over the network is required.
There is just the extbfroot user account created on the router by default. See the product
label on the router for its default password. Log in to the web interface by the root user
and his password. See the configuration manual of the router for a detailed description and
examples of the router configuration.
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons.
For security reasons, we highly recommend updating the router's firmware to the latest
version regularly. Downgrading the firmware to an older version than the production
version or uploading firmware intended for a different device may cause the device's
malfunction.
2. Configuration Settings via WebAccess/DMP
Your router has been pre-installed with the WebAccess/DMP client, which has activated
the connection to the WebAccess/DMP server by default. You can disable this connection on
the Welcome page when logging into the router's web interface or on the (Customization ->
Router Apps -> WebAccess/DMP Client) configuration page. For more information see the
configuration manual of your router, chapter Basic Information -> WebAccess/DMP Configu-
ration.
The activated client periodically uploads router identifiers and configuration to the Web-
Access/DMP server.
QSG-0014-EN, June 23, 2022
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
address in a web browser. Please note that usage of the HTTPS
6
Start Guide
Released in the Czech Republic
Advertisement
