Filling The Rinse-Aid And Setting - CDA CDI6242 Use And Maintenance

4.12 Filling The rinse-aid and setting

To fill the rinse aid compartment, open
the rinse-aid compartment cap. Fill the
compartment with rinse aid to the MAX
level and then close the cap. Be careful not
to overfill the rinse aid compartment and
wipe up any spills.
In order to change the rinse aid level,
follow the below steps before turning on
the machine:
• Open the door of the machine.
• ·Turn on the machine, and press the
Programme button as soon as the
machine is turned on.
• Hold down the Programme button until
"rA" disappears. Rinse aid setting follows
water hardness setting.
• The machine will display the last setting.
• Change the level by pressing the
programme button.
• Turn off the machine to save the setting.
The factory setting is "4".
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
Level Brightener Dose
1 Rinse-aid not
dispensed
2 1 dose is
dispensed
3 2 doses are
dispensed
4 3 doses are
dispensed
5 4 doses are
dispensed
Indicator
r1 is shown on the
display.
r2 is shown on the
display.
r3 is shown on the
display.
r4 is shown on the
display.
r5 is shown on the
display.
EN - 16