Page 1
CDI6242 Integrated dishwasher Use and maintenance IO-DWS-3600 05.2022./1...
Page 2
Thank you for choosing this product. This user manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this user manual before using your appliance and keep this book for future reference.
1 SAFETY INSTRUCTIONS 1.1 General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
There may be some residue left in the machine after washing. Keep children away from the machine when it is open. 1.2 Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine.
Always use the coated plug supplied with your machine. If the electrical cable is damaged, it should only be replaced by a qualified electrician. • Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa.
Page 7
Do not open the door while the machine is in operation, hot water may spill out. Safety devices ensure the machine stops if the door is opened. The machine door should not be left open. It may cause accidents. Place knives and other sharp objects in the cutlery basket in a blade-down position.
Page 8
Pull the plug to disconnect the machine from the mains, never pull on the cord. EN - 8...
2 INSTALLATION water). For all other models: Cold water preferred; hot water max. 2.1 Machine Positioning temperature 60 °C. When positioning the machine, place it in an area where dishes can be easily loaded 2.3 Water Inlet Hose and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C.
2.4 Drain Hose (Model Depending) 2.5 Electrical Connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the...
3 TECHNICAL SPECIFICATIONS 3.2 Technical Specifications Capacity 15 place settings Dimensions Height 820-870 (mm) Width 598 (mm) Depth 570 (mm) Net weight 38,6 kg 220-240V Operating voltage / 50 Hz frequency Total current 10(A) Total power 1900(W) Maximum: 1 Water supply 3.1 General Sppearance (Mpa) Minimum: pressure...
Page 12
RECYCLING • Some machine components and packaging consist of recyclable materials. • Plastics are marked with the international abbreviations:(>PE<, >PP<, etc. ) • The cardboard parts consist of recycled paper. They can be put into waste paper containers for recycling. •...
4 BEFORE USING THE 4.3 Fill The Salt (IF AVAILABLE) APPLIANCE To add softener salt, open the salt compartment cap by turning it counter 4.1 Preparing Your Dishwasher For First clockwise. (1) (2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing.
4.4 Test Strip Run water Keep the Shake the Wait Set the hardness level of through the strip in the strip. (1min.) your machine. tap (1min.) water (1sec) NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.
4.8 Detergent Usage 4.10 Using Combined Detergents Only use detergents specifically designed These products should be used according for domestic dishwashers. Keep your to the manufacturer’s instructions. detergents in cool, dry places out of reach Never put combined detergents into the of children.
4.12 Filling The rinse-aid and setting To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid compartment and wipe up any spills.
5 LOADING YOUR DISHWASHER SOFT TOUCH Top basket For best results, follow these loading Height Adjustable Rack guidelines. These racks are designed to increase the Loading the household dishwasher up to the capacity of the top basket. You can place capacity indicated by the manufacturer will your glasses and cups on the racks.
Page 18
Foldable racks Four Folding Racks Foldable racks on the upper basket are The folding racks allow easier placement designed in order to let you place big items of larger items, such as pots and pans. easier such as pots, pans, etc. If requested, Each section can be folded separately.
Page 19
Height Adjustment Height Adjustable Rack (peg type) The upper basket includes a mechanism The foldable racks in the upper basket which enables the height of the basket enable the placement of large items such to be adjusted up (1) or down (2) without as pots and pans.
5.2 Alternative Basket Loads Lower Basket Top Basket Incorrect Loads Incorrect loading can cause poor washing and drying performance. Please follow the manufacturer’s recommendations for a good performans result. EN - 20...
6 PROGRAMME TABLE Program 50 minutes 30 minutes Prewash Hygiene Eco 50°C Intensive Delicate 40°C Name: 40°C 50°C 65°C Pro 70°C Standard program for Suitable Suitable for normally for heavily Suitable Suitable to Suitable normally Suitable for soiled daily soiled for lightly rinse dishes for heavily...
7 THE CONTROL PANEL NOTE: If you decide not to start the selected programme, please see the "Changing a Programme" and "Cancelling a Programme" sections. İİİ İ İİ NOTE: When there is insufficient 1. On/Off button softening salt, the Salt Lack Warning Indicator (ii) will illuminate to indicate the 2.
Page 23
Cancelling a Programme Buzzer Sound Control Follow the steps below if you would like to To change the buzzer sound level, follow cancel a programme while in operation. the below steps: 1. Open the door and press Programme (2) and Delay (4) buttons simultaneously for 3 Open the door of your machine.
8 CLEANING AND MAINTENANCE To remove and clean the filter combination, turn it counter clockwise and remove it by Cleaning your dishwasher is important to lifting it upwards (1).Pull the coarse filter out maintain the machine’s service life of the micro filter (2).Then pull and remove Make sure that the water softening setting the metal filter (3).Rinse the filter with lots of (If available) is done correctly and correct...
8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on p ieces of broken glass or pointed implements.
9 TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
Page 27
FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
Page 28
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE POSSIBLE FAULT WHAT TO DO CODE Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of Water inlet system failure the hose.
10 Warranty and service The manufacturer shall not be held liable for any damage caused by improper use of the product. • Repairs carried out by unqualified persons may seriously endanger the appliance user • Pursuant to Commission Regulation (EU) 2019/2022, The minimum availability period for spare parts necessary to repair the appliance is 7 or 10 years depending on the type and purpose of the spare part...
11 Declarations of Conformity: This appliance has been manufactured to comply with all EU & UK statutory requirements and complies with all applicable legislation and the following European Directives: • The Low Voltage Directive 2014/35/EU • Electromagnetic Compatibility Directive 2014/30/EU •...