Installing Standard Program Package On Server Core - NEC Express5800 Series Installation Manual

Chapter 1 Installing Windows

3.3.2 Installing Standard Program Package on Server Core

1. Sign-in to the Windows with an Administrators privilege.
2. Set the Starter Pack DVD to the drive.
3. From the command prompt, type the following command.
In the example below, the optical disk drive is the D drive.
cd /d D:\software\010\win\seamless
C:\Users\administrator>cd /d D:\software\010\win\seamless
4. Type the following command, and then press <Enter> key.
instcmd.vbs spp /s
D:\software\010\win\seamless >instcmd.vbs spp /s
5. If you had updated firmware beforehand, click OK to start the installation of Standard Program
Package.
Wait until installation completes (about 5 to 15 minutes).
6. Click OK.
7. After removing the Starter Pack DVD, restart Windows Server 2022 manually.
SPP installation is now complete.
Note
 If the following message displayed during installing the Standard Program
Package, reboot the system and retry Step1-5.
 iLO may be reset during applying Standard Program Package.
If iLO is reset, iLO remote console and iLO virtual media is disconnected.
When iLO remote console and iLO virtual media is disconnected, connect
again after 30 seconds or more.
Installation Guide (Windows Server 2022)
3. Installing Windows Server 2022
37