Table of Contents
Advertisement
Service Manual
6.3 Operation Method
Basic Operation
1. Turn ON/OFF unit
After putting through the power, press "ON/OFF" on control panel or "ON/OFF" on remote controller.
2. Selection of operation mode
Press "Cool" button or "Heat" button on control panel to select cooling mode or heating mode. Press "Function" button on control panel
can select auto, dry or fan mode, or press "Mode" button on remote controller to select the mode in the sequence of auto, cool, dry, fan or
heating (not available for cooling only unit). Set temperature won't be displayed under auto mode and then temperature is defaulted at 25°C
(77°F).
3. Selection of fan speed
Press "Fan" button on control panel or press "Fan" button on remote controller to select, auto, low, medium or high fan speed. Only low fan
speed can be set under dry mode (including auto dry mode). Fan speed can be adjusted by press this button.
4. Set temperature
Press "+/-" button on control panel or "+/-" button on remote controller to adjust set temperature. Press those two buttons for 3s can shield
all buttons on control panel or remote controller. Temperature setting range is 16°C(61°F)~30°C(86°F). Temperature can't be adjusted under
auto mode.
left&right Wind Direction Adjustment
● Press "
" button on remote controller or "
control the operation and stop of left&right swing motor to let swing blade rotate left&right or stop at a certain
angle to blow wind.
● If indoor fan is operating, as for each pressing of "
of instruction of remote controller for swing method for details.
● Press "
" button on remote controller can turn on or turn off left&right swing. Press this button once to
turn on swing function and press it again to turn off swing function.
● When swing function is turned off, the characters andicon of left&right swing on remote controller or display
will disappear; When selecting other status, swingcharacters and icon will display.
Up&down Wind Direction Adjustment
● Press " " button on remote controller or " " on control panel can select up&down swing method, and
control the operation and stop of up&down swing motor to let swing blade rotate up&down or stop at a
certain angle to blow wind.
● If indoor fan is operating, as for each pressing of " " button on remote controller, please refer to the
part of instruction of remote controller for swing method for details.
● Press " " button on remote controller can turn on or turn off up&down swing. Press this button once
to turn on swing function and press it again to turn off swing function.
● When swing function is turned off, the characters and icon of up&down swing on remote controller or
display will disappear; when selecting other status, swing characters and icon will display.
● Cooling, drying ─ Set to blow wind at front side or blow wind upwards in general.
When turning on the unit, you can select to blow wind downwards to decrease temperature around
people quickly. However, it can't keep blowing wind downwards for a long time to make sure good air
ventilation of indoor air.
● Heating ─ Set to blow wind downwards in general.
Technical Information
" on control panel can select up&down swing method, and
" button on remote controller, please refer to the part
Air outlet grille
Air outlet rotates left&right
Up&down swing
blade (horizontal)
Up&down swing
Up&down swing
blade (upwards)
blade (upwards)
(can set
or
)
(can set
or
)
21
Advertisement
Table of Contents
Troubleshooting
