Function And Control; Function Buttons And Displayer - Gree GVH24AK-K3DNC6A Service Manual

Service Manual

6. Function and Control

6.1 Function Buttons and Displayer

NOTE: This series adopts concealed touch buttons. Touch buttons slightly when buttons are displayed.
2
4
6
8
●Under unit off status, press Function button to set timer.When the timer icon is blinking, touch slide bar to set timer. If there is no
operation within 5s after finishing setting, the setting will be confirmed. The setting can be confirmed also by pressing Function button.
Note:
After the function is selected by Function button, if the unit is not turned off and there is no remote signal, the function will circulate
from last selected function when pressing the Function button within 2min; the function will circulate from the first function icon when
pressing the Function button after 2min or turn off the unit or there is remote signal.
8. Pufity button
Press this button can turn on or turn off Pufity function.
Technical Information
Button Display
Under de-energization status, all buttons are OFF, except ON/OFF button. Touch ON/
OFF button slightly to turn on the unit directly; touch any other buttons and all buttons will
be ON. After turning on the unit, all button except ON/OFF button and other display icons
are controlled by light button on remote controller. When turning off the light, if touch
any button except ON/OFF switch, all buttons are display. After buttons are concealed,
touch button zone and all buttons will be displayed. You can perform the corresponding
operation when buttons are displayed. If there's no operation for any buttons, buttons will
Display
be concealed after 10s.
1. ON/OFF button
●Press this button can turn on or turn off the air conditioner. When turning on or
turning off the air conditioner,original timer and sleep function will be cleared.
●Under energization status, indicator "
Note:
Under x-fan operation period, press ON/OFF button to turn on the unit directly.
2. Up&down swing button
Slide Bar
Press this button to turn on or turn off up&down swing.
3. Left&right swing button
Press this button to turn on or turn off left&right swing.
4. Heat button
Press this button can turn on the heating mode.
Button
5. Cool button
Press this button turn on the cooling mode.
6. Speed button
Press Speed button to change the fan speed as below:
Note:
3
Quiet and turbo function are set by Speed button. Quiet and turbo function are not
available in dry, fan and auto mode. Quiet function is not available in heating mode.
The fan speed is low in dry and auto dry mode. The fan speed is not adjustable and fan
5
speed button is invalid.
7. Function button
●Under unit on status, press Function button to switch function in the sequence of auto,
7
dry, fan, eco fan, setting, room temp., timer. When the function icon is blinking, it means
this function can be set through slide bar button. If there is no operation within
1 5s after finishing setting, the setting will be confirmed. The setting can be confirmed also
by pressing Function button.
" is ON.
Auto Quiet Low Medium-low
Medium
Turbo High Medium-high
15