SA1E SA1E Miniature Photoelectric Switches (Built-in Amplifier) Background Suppression Ignores the background and detects the objects only. Smaller beam makes it possible to detect small objects and narrow gaps between the (BGS) objects. The upgraded model is also less affected by the object colors. Diffuse-reflective Background Suppression (BGS) Background Suppression (BGS)
Page 3
Upgraded SA1E Long Distance Detection Through-beam with infrared LED sensitivity adjustment Polarized retro-reflective with sensitivity adjustment When using a reflector (IAC-R5/-R8) Coaxial Polarized Retro-reflective (Transparent Object Sensing) Coaxial optical structure and narrow beam ensure stable detection; unaffected by Aplication Example Because the SA1E-X narrowing, inclination or shaking of a bottle.
Page 4
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Simple, compact design for world-wide usage. • Seven sensing methods • Cable model (three cable lengths) and M8 connector models are available. • NPN output, PNP output, light ON, dark ON can be selected. • Sensing range doubled with SA1E-T through-beam (infrared LED/ with sensitivity adjustment) and SA1E-P polarized retro-reflective models (with sensitivity adjustment).
Page 5
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Package Quantity: 1 Part No. Cable Operation Sensing Method Sensing Range Connection Length Mode NPN Output PNP Output Light ON SA1E-BN1 SA1E-BP1 Dark ON SA1E-BN2 SA1E-BP2 Light ON SA1E-BN1-2M SA1E-BP1-2M Cable 20 to 200 mm Dark ON SA1E-BN2-2M SA1E-BP2-2M...
• Two mounting screws (M3 × 14 mm sems screws) are supplied with the SA9Z-K03. • The through-beam model requires two mounting brackets, one each for the projec tor and the receiver. • The SA9Z-K02 cannot be used for the connector models. • Contact IDEC about mounting brackets for the connector.
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Specifications Through-beam Polarized Retro-reflective Sensing Method Infrared LED Red LED With sensitivity With sensitivity With sensitivity adjustment adjustment adjustment Part No. SA1E-T SA1E-TA SA1E-P Power Voltage 12 to 24V DC (Operating range: 10 to 30V DC) equipped with reverse-polarity protection Projector: 15 mA Current Draw 30 mA...
Page 8
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Specifications Background Suppression Coaxial Polarized Sensing Method Diffuse-reflective Small-beam Reflective Convergent Reflective (BGS) Retro-reflective Part No. SA1E-D SA1E-B SA1E-N SA1E-G SA1E-X Power Voltage 12 to 24V DC (Operating range: 10 to 30V DC), equipped with reverse-polarity protection Current Draw 30 mA 20 mA...
Page 9
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Slit and Sensing Range A slit, which changes the beam size of through-beam sensors, can easily be attached to the sensing side of the through-beam projector and receiver. Three different slit widths are available. w/Sensitivity Adjustment The slit can be pressed to Minimum Detectable Object Width...
Page 10
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Dimensions Cable Model Through-beam (infrared LED w/sensitivity adjustment) 11.7 Operation LED (yellow) Stable LED (green) (Note 6) Sensitivity Control 19.5 Projector/ Receiver Receiver Polarized retro-reflective (with sensitivity adjustment) Diffuse-reflective Background Suppression (BGS) Small-beam reflective Projector 2-M3 Through-beam...
Page 11
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Dimensions Connector Model 11.7 Through-beam Operation LED (yellow) (infrared LED w/senistivity adjustment) (with right angle Stable LED connector) (green) (Note 6) Sensitivity Control 19.5 Projector/ Receiver Receiver Polarized retro-reflective (with sensitivity adjustment) Diffuse-reflective Background Suppression (BGS) Projector 2-M3 Small-beam reflective...
Page 12
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Dimensions Note 1: Center of optical axis (through-beam) Note 2: Center of optical axis (polarized retro-reflective, diffuse reflective, small-beam reflective, and Mounting Brackets convergent reflective model) 10.8 19.5 (3.2) 10.8 19.5 (3.2) Vertical Mounting With SA9Z-K01 Mounting Bracket...
Page 18
SA1E Miniature Photoelectric Switches (Built-in Amplifier) 6. Convergent Reflective SA1E-G (Infrared LED w/sensitivity adjustment) Excess Gain Lateral Displacement Object Size vs. Sensing Distance Object: 100mm white mat paper Object: A mm white mat paper Operation Level Distance (mm) Sensing Distance X (mm) Side Length A (mm) Brightness vs.
Page 19
SA1E Miniature Photoelectric Switches (Built-in Amplifier) Instructions 1. Indicator and Output Operation Photoelectric Sensitivity Step Adjusting Procedure (except for background suppression model) Switch Status Control Receiving light Turn the control counter- • The operation LED turns on (yellow) when the control output clockwise to the mini mum (–).