Advertisement
CODING MODE
When you have completed your program, the matrix will look something like this:
Now the icon bar at the bottom of the app is used:
Complete programming: You must always press this button when you have
finished programming.
Use the Play key when you want the Sidekick to perform your
programming steps.
Use the Pause key to pause the Sidekick.
The Loop key is used to get the Sidekick to repeat the program again
and again.
The Memory key enables you to store up to three program sequences. After
tapping the key, a menu opens asking you to choose the program location where
you would like to store the sequence. Click on the small disk icon to save the
program. To call up a saved program, press the Memory key, select program
number 1, 2, or 3, and press the Memory key again.
Delete key: If you click on a command and then click this key, it will be removed.
If you hold this key for longer, you will delete the entire sequence.
34
Advertisement
