Mounting The Dolphin Homebase Device - Honeywell Dolphin 7600 User Manual

Mounting the Dolphin HomeBase Device

If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good
lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase.
Back Panel Dimensions
.32 in.
8.06mm Diameter,
2 places
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #4–diameter measurement of 0.112
in. (2.845 mm).
2. Drill two holes into the wall. The holes should be located approximately 1.44 in. (36.7 mm) apart.
3. Insert a screw into each hole, leaving 0.2 in. (5 mm) of its head exposed.
10 - 6
.15 in.
(3.85 mm.)
4.35 in.
(110.47 mm.)
Rev A
5/23/2008
1.44 in.
(36.7 mm.)
.53 in.
13.65mm,
2 places
1.85 in.
(46.87 mm.)
Dolphin® 7600 Mobile Computer
3.99 in.
(101.42 mm.)
User's Guide