External Gps; Memory - Honeywell Dolphin 7600 User Manual

External GPS

If a Windows Mobile 6.0-based device is equipped with a GPS module, External GPS is a Microsoft tool
that determines which port an external GPS software application can use.
The Dolphin 7600 terminal is not equipped with a GPS module.

Memory

The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/
Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about
memory.
You cannot change the terminal's memory allocation in the Memory system setting. To change the
memory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more
details, please refer to the Honeywell Power Tools User's Guide, which is available for download from
www.honeywell.com/aidc.
There are three tabs: Main, Storage Card, and Running Programs.
Main Tab
6 - 10
This tab displays the usage statistics of the on-board,
volatile RAM memory.
Columns:
=
Storage RAM memory used for storing programs and program
data.
=
Program RAM memory used to run programs.
Rows:
Total= Displays the current MB of memory allocated for use.
In use=Displays the total MB of that allocated memory in use.
Free=Displays the total MB of memory available.
Rev A
5/23/2008
Dolphin® 7600 Mobile Computer
User's Guide