Advertisement

INSTALLATION INSTRUCTION

BEFORE INSTALLATION

CAUTION:
• Shut off the water supply line. If the sink doesn't have its own water
shut-off valve, shut off the water valve for your whole home. Drain
standing water from the hot and cold lines into a bucket.
(1) Install the drain on the pedestal sink. Insert the drain from top of the sink, place rubber gasket
and moun�ng lock nut from the bo�om of the drain and hand �ghten the lock nut.
(2) Connect flexi hose drain to the drain assembly as drawing.
WOODBRIDGE
www.woodbridgebath.com
R
20210909 REV. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L2280 and is the answer not in the manual?

Questions and answers

Summary of Contents for Woodbridge L2280

  • Page 1 INSTALLATION INSTRUCTION WOODBRIDGE BEFORE INSTALLATION CAUTION: • Shut off the water supply line. If the sink doesn’t have its own water shut-off valve, shut off the water valve for your whole home. Drain standing water from the hot and cold lines into a bucket.
  • Page 2 WOODBRIDGE (3) Insert the other end of the drain tube and cap to waste outlet on wall/floor. 4"—13 3/4" (4) Place the pedestal sink against the wall, put a level on top of the sink and make sure it is level and stable, any minor adjustment if necessary.
  • Page 3 WOODBRIDGE 1. Clean the surface with water and make sure no dust remains. 2. Using water, polish the area star�ng with 800 grit sandpaper then final with 1000 grit sandpaper. 3. Wipe up remaining wax with clean dry cloth. DAILY CARE: Do’s:...

Table of Contents