Elo TouchSystems E421325 ELO-STAND-SELF-SERVICE-15-22-FLOOR-TOP4 Assembly Instructions Manual page 18

26
A
Place I-Series on surface near stand head, within reach of
cable. Remove cable door (A), plug in power cable (B)
and replace cable door (C) as shown.
27
Mount I-Series, then add bottom VESA screws:
15": add (2) screws from bag "M" to bottom
75mm VESA positions.
22": add (2) screws from bag "N" to bottom
100mm VESA positions.
B
C
Route, LAN cable through bottom of stand
head. Route USB Hub cable or other
if used.
Add tie-wrap
USB
© Copyright 2021 Elo Touch Solutions, Inc.
18