Table of Contents
Advertisement
VERS. 2017.11.21
Blade pitch (2)
The blade pitch is controlled using a hydraulic pump system on the handle.
Belt drive and belt cover (3)
A centrifugal clutch inside the engine pulley drives the gear shaft through V-Belts. It allows to
gradually engage the tool rotation. The drive assembly is enclosed in a metal guard.
Safety guard ring (4)
A safety guard ring protects the operator from the rotation of the tool while offering an optimum
view of the working progress.
Thermal Engine (5)
The machine has a GX200 Honda engine, with 4,8kW. The dead-man handle (7) allows an
immediate stop of the machine in case of danger.
Lifting eye (6)
To lift the machine easily and safely, a lifting eye is located over the engine. This allows a balanced
lifting of the machine.
2.4 Technical Data
Engine
Filter
Fuel
Oil
Starter
Type of spark plug
Type of tool
Max. tool diameter
Blade shaft speed
Machine dimensions
Max. operating weight
Sound pressure level
Sound energy level
Honda GX200, 4 strokes, 1 cylinder, 6,5HP (4,8kW)
Dual Filter
Regular unleaded
Honda 4-Stroke, or equivalent high detergent, premium quality
motor
oil
certified
manufacturer's requirement for service classification SG, SF. (SG,
SF designated on the oil container).
SAE 10W-30 recommended
Manual pull chord
BPR6ES (NGK)
W20EPR-U (DENSO)
Blade or plate
900 mm
130 min-1
1980x950x1060 mm
81 kg
85 dB (A) (ISO EN 11201)
94 dB (A) (ISO EN 3744)
CT901HP_MAN_EN
to
meet
or
exceed
U.S.
automobile
9
Advertisement
Table of Contents
