Table of Contents
Advertisement
VERS. 2017.11.21
CT901HP_MAN_EN
1 BASIC SAFETY INSTRUCTIONS
The CT901 HP is exclusively designed for the finishing of wet concrete floors mainly on
construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall
be borne entirely by the user. Observing the operating instructions and compliance with inspection
and servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Ear protection and safety goggles must be
Read operator's instructions
worn
Turn the knob in the indicated direction to
To prevent severe injuries, keep the feet and
tilt (UP) or flatten (DOWN) the blades.
fingers away from the rotating tool
6
Advertisement
Table of Contents
