Advertisement
Arize Factor
3.2 Connect the Driver Output to Light Module
AC Input
Driver connections
1
CLICK!
Align keying features of larger output connector on
driver with connector on light module cable. Push
connectors together until the lock ring has snapped
into place and a click is heard.
NOTE: To disassemble connectors, turn locking ring
1/8 of a turn counter-clockwise and separate
connectors.
3
6
Recommended: secure lightbar cable.
Dimming
DC Output
6
DC adapter cable
8
2
Driver
Connect other end of cable to the first lightbar or
extension cable.
Be sure to tighten collar.
NOTE: Use 900 mm or 1500 mm extension cables if
driver and lightbar are more than 0.6 m apart.
Installation Guide
Lightbar
Advertisement
