Specifications - Intec AIRSENSE I-310e Operator's Manual

I-310e – UserManual

Specifications

Operating principle
Gas sampling method
Measurement range
Typical drift (per year)
Accuracy
Repeatability
Recommended Calibration Interval
Response time
Operating temperature range
Operating humidity range
Storage temperature
Power requirements
Power consumption
Calibration adjustments
Calibration verification time
Dimensions
Voltage output (linear)
Current output (linear)
Warm-up time
Weight
Optional Digital Display
Optional
High
Limit
Contact
Operating life expectancy
Warranty
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. |
setpoint range
contact polarity
contact rating
DCS, Inc. | PRE 200217 | Page 5 of 17
©
Non-dispersive infrared (NDIR)
Diffusion or sample draw
0 - 5000 ppm CO 2
±75 ppm (@ 1200ppm)
±5% of reading or ±75 ppm,
±20 ppm
Five Years
Less than 1 minute
0 to 50 ° C
0 - 90% RH (non condensing)
-30 to + 60 ° C
20 - 28 V AC, 18 - 30 VDC
RMS
Less than 2W @ 24 VAC
Span only (offset electronically
nulled)
10 minutes typical
5.2" x 3.2" x 1.4"
0 - 10 volts DC standard
4 - 20 mA (R ≤ 500Ω)
L
3 minutes
6.5 Oz. (.35 Kg)
4 digit, .35" LCD
0 to full scale
jumper selectable
2A @ 24 VAC
10 years typical
18 months, parts and labor through
repair or exchange