Cisco 7100 Series Quick Start Manual page 5

Rack-Mount the Router
Ci sc o 71 00
0
2
Attach the Brackets to the
Router
1
Locate the brackets and screws.
2
Use a Phillips screwdriver to attach the
brackets on the side panels of the router
in one of the following ways:
— Front panel forward
— Rear panel forward
Note: Although these installations show
the 19-inch brackets, the procedure is the
same for the larger brackets.
SER IES
Note: This procedure assumes you are
installing the router in a rack. For tabletop
installation, refer to the Cisco 7100 Series
VPN Router Installation and Configuration
Guide.
3