Optional Accessories; Connector Box; Xkm 3200; Data Protection And Data Security - Miele PDR 914 HP Operating And Installation Instructions

Optional accessories


Accessory parts may only be fitted when expressly approved by Miele. If other parts are
used, warranty, performance and product liability claims will be invalidated.

Connector Box

The optional Connector Box allows external hardware from Miele and other suppliers to be
connected to the Miele Professional machine. External hardware includes, e.g. payment
system, peak-load system, pressure sensor or an external vent flap.
The Connector Box is supplied with mains voltage by the Miele Professional washing ma-
chine.
XKM 3200
The optional Miele communication module can be used to establish a data connection
between a Miele Professional machine and a data processor in accordance with the Ether-
net or WiFi standard.
It is not possible to integrate the machine into the "Miele@home" app for domestic in-
stallations.
The communication module is intended exclusively for commercial use and is supplied
with mains voltage directly via the Miele Professional machine. No additional power con-
nection is required. The Ethernet interface provided via the communication module com-
plies with SELV (safety extra low voltage) requirements in accordance with EN 60950.
Connected external machines must also comply with SELV.

Data protection and data security

When you activate the networking function and connect your appliance to the Internet,
your appliance sends the following data to the Miele Cloud:
- Appliance serial number
- Appliance model and technical features
- Appliance status
- Information about the software status of your appliance
Initially, this data cannot be assigned to a specific user and is not saved permanently. Data
cannot be saved permanently or assigned to a specific user until after you have linked your
appliance to a user. Data transmission and processing are governed by Miele's strict se-
curity standards.

Factory default settings for network configuration

You can reset all of the settings on the communication module or your integrated WiFi
module to the factory default settings. The network configuration should be reset
whenever an appliance is being disposed of or sold, or if a used appliance is being put into
operation. This is the only way to ensure that all personal data has been removed and the
previous owner will no longer be able to access the appliance.
42