Panasonic TH-37PA30E Service Manual page 43

item
Initial INPUT Select input signal modes.
Set this signal, each time power is
switched on.
<Selection> :
Off/TV/AV1/AV2/AV2S/AV3/Av3S/AV4
/Av4S/AV4C/PC
-
Off: give priority to a last memory. However, Euro
model is compulsorily set to TV.
-
AVnS/AVnC: only Euro model selectable
-
PC: selectable with VGA option
Initial VOL Adjust output Volume.
level
Set this volume, each time power is
switched on.
If the value of InitVol is changed,
volume will change. However,
priority is given to a last memory
when InitVol is Off. When"InitVol" is
larger than "MaxVol", make "InitVol"
and "MaxVol" the same.
<Selection/Range> :
Off/0 to 100
-
Off: give priority to a last memory
Maximum Adjust maximum volume.
VOl level
Set this max. volume, each time
power is switched on.
When "MaxVol" is smaller than
"InitVol", make "MaxVol" and
"InitVol" the same, if "InitVol" is not
Off.
<Range> :
0to 100
Initial POS Select programme number.
Set this programme number, each
time power is switched on.
<Selection> :
Off/0 to 99 (Euro model)
-
Off: give priority to alast memory
Function
43