5. Remove the DG-Board, the H-Board and the T-Board.
A. Remove the couplers (DG2, DG3, DG6, DG8, DG10, DG12, H9), a
flexible cable (DG7), and the screws (×5 ).
B. Remove the DG-Board, the H-Board and the T-Board with the
bracket.
C. Remove the bridge connectors (DG1-H1, DG4-H4) and remove
the screws (×3 ) on the DG-Board.
D. Remove the DG-Board.
E. Remove the screws (×6 ) on the H-Board and the screws (×2 )
on the T-Board bracket.
F. Remove the coupler (H10) and the antenna cable, remove the T-
Board with the T-Board bracket.
G. Remove the H-Board.
H. Remove the screws (×2) and remove the T-Board.
12