Panasonic TH-37PA30E Service Manual page 20

17. Remove stand brackets.
A. Remove the plasma panel section from the servicing stand and
lay on a surface such as a table (covered), with the plasma
panel surface facing downward.
Spread a soft cloth or similar on the table for protection, so the
panel surface is not scratched.
B. Remove the stand bracket (left, right) fastening screws (×4
each) and remove the stand brackets (left, right).
18. Replace the plasma panel (finished).
A. Place the new plasma panel (finished) on the flat surface of the
table (covered by a soft cloth), with the plasma panel surface
facing downward.
B. Fit the stand brackets (left, right) to the new plasma panel.
20