Using The Device - Dometic CE99-DF Installation And Operating Manual

Hobs and Combinations
6.3 Connecting the device to the gas supply
!
WARNING! Risk of injury
Only use propane or butane gas cylinders with a certified pressure reduction valve and
suitable head. Compare the pressure information on the type plate with the pressure
information on the propane or butane gas cylinder.
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Use only steel pipe ∅8 x 1 mm (welded, seamless steel or stainless steel)
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that no loads are placed on the
actuators.
• The entire gas line must be free of stress.
1. Connect the pipes as shown (fig. e, page 13).
2. Attach a sign above the device with the following text:
"WARNING!
When cooking, additional ventilation must be provided, for example, by opening windows near the device.
The device must not be used as a space heater."
3. Open the gas supply.
!
WARNING! Risk of injury
Never check for leaks with an open flame or near sources of ignition.
4. Check all connections for leaks with leak spray.
There are no leaks if no bubbles form.
6.4 Connecting the device to the power supply
(models with electronic ignition only)
1. Connect the device as shown (fig. f, page 13).
2. Add a 1 A fuse in the plus line near the battery.
7

Using the device

CAUTION!
Do not shut lid when burner is alight.
7.1 Igniting a burner
!
WARNING! Risk of injury
The complete ignition process must be visible from above and must not be hidden by
pots placed on the stove.
EN
Using the device
25