Advertisement
Operation & Maintenance Manual
Lync AquaSolve
Anti-Scale Systems
Chemical-Free, Salt-Free
Scale Prevention
LM8414TM-COM (50 GPM)
LM8416TM-COM (75 GPM)
Important: Read this Manual BEFORE using this equipment. Failure
to read and follow all safety and use information can result in death,
serious personal injury, property damage, or damage to the
equipment. Keep this Manual for future reference.
L-OMM-010_A
Lync • 425 W Everman Pkway, St. 200
Technical Support • (800) 433-5654 (ext. 3) • Mon-Fri, 8 am - 5 pm CST
Engineered Solutions
|
Fort Worth, TX 76134
|
(817) 335-9531
© 2021 Lync
Advertisement
Table of Contents
Related Manuals for Watts Lync AquaSolve LM8414TM-COM
Summary of Contents for Watts Lync AquaSolve LM8414TM-COM
- Page 1 Operation & Maintenance Manual Lync AquaSolve Anti-Scale Systems Chemical-Free, Salt-Free Scale Prevention LM8414TM-COM (50 GPM) LM8416TM-COM (75 GPM) Important: Read this Manual BEFORE using this equipment. Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment.
- Page 2 Operation & Maintenance Manual Lync AquaSolve INTRODUCTION • Perfect system for towns or communities where water softeners are banned or restricted The AquaSolve provides protection from scale for- • For high-flow applications**, install multiple tanks mation on internal plumbing surfaces. The AquaSolve in parallel can be installed at the point of entry to a building to •...
-
Page 3: Specifications
Operation & Maintenance Manual Lync AquaSolve Specifications Standards AquaSolve scale prevention system shall be installed Independent scientific testing has confirmed on the main water service pipe just after it enters the Template Assisted Crystallization (TAC) technology building, but after other whole building water safety provides scale reduction of over 95+%. -
Page 4: Equipment Specifications
Operation & Maintenance Manual Lync AquaSolve Equipment Specifications binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes. AquaSolve systems are complete, selfcontained, loaded with media, and ready to use. A simple *****All other contaminants must meet the requirements of the USEPA Safe Drinking Water Act. -
Page 5: Installation
Operation & Maintenance Manual Lync AquaSolve Installation steady stream of water appears at the drain, close the supply valve and hose bibb. Once the tank is full, Tighten the tank head wait 4 hours for media to “hydrate”. Slowly open the inlet and outlet valves on the sys- NOTICE tem. - Page 6 Operation & Maintenance Manual Lync AquaSolve let the whole pipe/ hose fill with media it will plug NOTICE up. You need to let slugs of water flush out the pipe Your AquaSolve media should be replaced every 3 years. Dispose as you go.
-
Page 7: Limited Warranty
Operation & Maintenance Manual Lync AquaSolve Alternative Method for Replacing Media 1. Any component failure must not result from abuse, fire, freezing or other acts of nature, violence, or improper installation. Follow steps 1 – 5 then, 2. Equipment must be installed and operated in compliance with the local plumbing codes and on an approved water supply.
Need help?
Do you have a question about the Lync AquaSolve LM8414TM-COM and is the answer not in the manual?
Questions and answers