Advertisement
Example Application #1: Security—Remote Alarm Monitoring and Control
Figure 4
Security—Remote Alarm Monitoring and Control
Remote Site/Office
ADM
SONET/SDH
Ring
TDM
Power Generator
HVAC
Temperature
The alarm interface controller (AIC) is a network module that greatly expands the network monitoring and control
capabilities of the Cisco 2600 and 3700 Series routers. The AIC functions as an integrated entity residing within the
Cisco 2600 platform to provide network alarm monitoring and proactive remote control of network elements. The
AIC reduces service-provider and enterprise operating expenses by facilitating an integrated solution to remote
network management. This eliminates the need for a dedicated external alarm-monitoring device. Greatly simplifying
network layout, monitoring, and control; resulting in lower operations, administration, maintenance, and
provisioning (OAM&P) costs. The AIC is supported in Cisco IOS 12.2(8)T and later. The AIC network module
supports 64 discrete alarm inputs, of which 8 of the last 64 alarm points are software-configurable to accept either
analog or discrete inputs. The AIC further supports 16 control relays to facilitate the proactive remote control of
network elements.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Surveillance
Camera
Cisco 2600 Router with AIC
Integrated alarm monitoring and
control capabilities undo the router
for increased network visibility downtime
Building
Reduced Network Complexity
Security
Enhanced Repoprting, Security and
Cisco Systems, Inc.
Page 4 of 20
TCP/IP
Cisco Router
Remote Control
Monitoring Center
Surveillance
Remote
Monitoring and
Provisioning
Advertisement
