Download Print this page

Cisco 2600-DC Series Datasheet page 14

Cisco 2600-dc series modular access platform

Advertisement

Table 3
Network Modules supported on the Cisco 2600 Series Serial and ATM NMs (requires IOS release
11.3 (3)T or later) (Continued)
Product Number
NM-HD-2V
NM-HD-2VE
Application Service Modules
NM-CIDS-K9
NM-CE-BP-20G-K9
NM-CE-BP-40G-K9
NM-CE-BP-SCSI-K9
NM-NAM
1. ,The voice/fax and ATM NMs require a Cisco IOS Plus feature set.
2. Requires Cisco IOS Version 12.05XK, 12.07T, 12.1, 12.1T, 12.2, 12.2T or later.
3. Requires Cisco IOS Version 12.1.2T or later.
4. 4Requires Cisco IOS Version 12.2(2)XT, 12.2(8)T or later
5. requires Cisco IOS Version 12.2(8)T or later.
6. Requires Cisco IOS Version 12.2(2)XT, 12.2(8)T or later.
7. Inline power from a DC power source requires an external cable and circuit.
Alarm Interface Controller Network Module
The Alarm Interface Controller (AIC) is a network module that greatly expands the network monitoring and control
capabilities of the Cisco 2600 and 3600 Series routers. The AIC functions as an integrated entity residing within the
Cisco 2600 Router to provide network alarm monitoring and remote control of network elements. The AIC reduces
service provider and enterprise operating expenses by facilitating a "single box" solution, doing away with the need
for a dedicated external alarm monitoring device. This greatly simplifies network layout, monitoring, and control
resulting in lower operations, administration, maintenance, and provisioning (OAM&P) costs. The AIC is supported
®
in Cisco IOS
12.2(8)T and beyond. The AIC network module supports 64 discrete alarm monitoring points, of
which 8 of the last 64 alarm points are software- configurable to accept either analog or discrete inputs. The AIC
further supports 16 control relays to facilitate the remote control of network elements.
Table 4
Alarm Interface Controller (AIC) Network Module Alarm Interface Controller (AIC) Network Module
Product
Product Number
Description
1
NM-AIC-641
Alarm monitoring and control NM;
64 contact points and 16 control points
1. Requires Cisco IOS Version 12.2(8)T or later.
2. Requires Cisco IOS Version 12.3(2)T or later on Cisco 2691.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Description
Two-slot IP Communications Voice/Fax
Network Module
Two-slot IP Communications Enhanced
Voice/Fax Network Module
Cisco IDS Network Module, 20-GB IDE
hard disk
Content Engine Network Module, basic
performance, 20-GB IDE hard disk
Content Engine Network Module, basic
performance, 40-GB IDE hard disk
2-port E&M voice/fax interface card for
voice/fax network module
Network Analysis Module
Cisco Systems, Inc.
Page 14 of 20
Cisco 2612
Cisco 2600XM
X
X
X
X
X
X
X
X
X
X
Cisco 2612
Cisco 2600XM
X
X
Cisco 2691
X
X
X
X
X
X
X
Cisco 2691
2
X

Advertisement

loading