Advertisement
Table 5
WAN Interface Cards for the Cisco 2600 Series Cisco 2600 Series WAN WICs (Continued)
Product Number
Description
WIC-1B-U-V2
1-port ISDN BRI with NT1
3
WIC-1AM
1-port Analog Modem interface card
3
WIC-2AM
2-port Analog Modem interface card
WIC-1ADSL-DG
1-port ADSL WAN Interface with Dying
Gasp
4
WIC-1ADSL
1-port ADSL WAN Interface
WIC-1ADSL-I-DG
1-port ADSLoISDN WAN Interface
WIC-1SHDSL-V2
1-port G.SHDSL WAN Interface with two or
four wire support
2
WIC-1SHDSL
1-port G.SHDSL WAN Interface
1. Requires Cisco IOS 12.0(5)XK or later.
2. Requires Cisco IOS 12.2(4)XL or later.
3. Requires Cisco IOS 12.2(2)XB or later and IOS IP Plus feature set.
4. Requires Cisco IOS 12.1(5)YB, 12.2(2)XK, 12.2(4)T or later.
Table 6
Voice Interface Cards for Use with the Voice/Fax Network Modules Module Voice Interface Cards
supported for use with the Voice/Fax NMs
Product Number
Description
1
VIC-2BRI-S/T-TE
2-port BRI S/T terminal equipment voice/
fax interface card for voice/fax NM
VIC2-2BRI-NT/TE3
2-port BRI (NT and TE) Voice Interface
module
VIC-2BRI-NT/TE3
2-port BRI (NT and TE) Voice Interface
module
VIC-2FXS
2-port FXS voice/fax interface card for
voice/fax NM
VIC2-2FXS
2-port FXS voice/fax interface card for
voice/fax NM
VIC-4FXS/DID
4-port FXS voice/fax interface card. (Note:
The DID feature is not supported at this
time.)
2
VIC-2FXO-M1
2-port FXO voice/fax interface card for
voice/fax NM w/ Caller ID & supervisory
disconnect (North American version and
other countries)
VIC-2FXO
2-port FXO voice/fax interface card for
voice/fax network module (North
American version and other countries)
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco Systems, Inc.
Page 16 of 20
Cisco
Cisco 2612
2600XM
X
X
X
X
X
X
X
X
X
X
X
X
X
Cisco 2612
Cisco 2600XM
X
X
X
X
X
X
X
X
X
X
X
X
X
Cisco 2691
X
X
X
X
X
X
X
X
Cisco 2691
X
X
X
X
X
X
X
X
Advertisement
