Polygroup SUMMER WAVES RP800 Owner's Manual page 7

1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your RP series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY (not included) on hand for lubricating the gaskets.
POWER FILTER IMPORTANT NOTES
1. Installer shall follow written instructions provided for operation of the circulation systems.
2. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) "Swimming Pools, Fountains and
Similar Installations" or its latest approved edition.
3. The Filter Cartridge 3-3/4" will hold as many as 2 of the 1" diameter chlorine tablets and the 8" will hold as many as 6 of the 1" diameter chlorine tablets. Check
15
your chlorine levels to determine the proper number of chlorine tablets to add. The filter cartridge will automatically dispense chlorine into the pool as the pump
runs. You must have the type of Filter Cartridge
DO NOT use this to dispense powdered chlorine, shock treatment or any other type of chemicals as damage to the pump, filter cartridge, and pool will occur.
4. The RP Series Filter Pump systems are manufactured by Polygroup
grounded - 115 V.A.C. - 60 Hz. (ALL Units must have a minimum of 105 V.A.C. to start and run properly.)
FILTER PUMP POWER INFORMATION
FILTER PUMP MODEL
RP800 Filter System with F700C Pump
RP1000 Filter System with F1000C Pump
RP1000 Filter System with F1500C Pump
RP2000 Filter System with F2000C Pump
ITEMS PARTS NAME
-
Motor Assembly (Pump)
1 6
Pump Retaining Nut
7
Filter Pump Canister
8
9
Seal Top Retainer
10
Vent Screw
11
Suction Hose
12
Return Hose
13
Hose Clamps
14
Filter Cartridge
15
Suction Fitting (SF)
16
SF Gasket (Black)
17
Suction Fitting Washer (SF Washer)
18
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
PRELIMINARY STEPS
with a central core mesh divider (See page 8) to use the chlorine dispenser.
15
PARTS LIST
Seal Top
MST. Extended operating days and hours during peak season requirements.
and ETL control number 4000608 and 4006317 - double insulated and
®
WATTAGE
57 watts
80 watts
120 watts
210 watts
QTY. ITEMS
1
19
1
20
1
21
1
22
1
23
1
24
1
25
1
26
4
27
1
28
1
29
GFCI Power Cord Set (image reference only)
1
30
1
OWNER'S MANUAL
AMPERAGE
1.1 amps
2.2 amps
2.2 amps
2.2 amps
PARTS NAME
SF Nut
SF Water Cap (Use For Service Only)
RF Plug (Use For Service Only)
O-ring (On Filter Case)
O-ring (On Vent Screw)
O-ring (On Hose Connections)
Return Fitting (RF)
RF Gasket (Black)
RF Nut
RF Diverter Fitting
Pool Wall (image reference only)
QTY.
1
1
1
1
1
4
1
1
1
1
7