SMS ACK: If checked, the router will send command feedback to sender's phone number. If
unchecked, the router will not send command feedback to sender's phone number.
Reboot Router Command: input the command for "reboot" operation, default is "reboot".
Get Cell Status Command: input the command for
default is "cellstatus". For example, if we send "cellstatus" to router, router will feedback the
status to sender such as
SN number and Cell Working Status.
Set cell link-up Command: input the command for
"cellup". If router gets this command, the Router Cell will be online.
Set cell link-down Command: input the command for
default is "celldown". If router gets this command, the Router Cell will be offline.
DIO_0 Set Command: set I/O port 0 to high(1). For SMS feature, please keep the parameter
default.
DIO_0 Reset Command: set I/O port 0 to low(0). For SMS feature, please keep the parameter
default.
DIO_1 Set Command: set I/O port 1 to high(1). For SMS feature, please keep the parameter
default.
DIO_1 Reset Command: set I/O port 1 to low(0). For SMS feature, please keep the parameter
default.
DIO_2 Set Command: set I/O port 2 to high(1). For SMS feature, please keep the parameter
default.
DIO_2 Reset Command: set I/O port 2 to low(0). For SMS feature, please keep the parameter
default.
DIO_3 Set Command: set I/O port 3 to high(1). For SMS feature, please keep the parameter
default.
DIO_3 Reset Command: set I/O port 3 to low(0). For SMS feature, please keep the parameter
default.
Button Set/Reset DIO: set DIO to high or low immediately.
DIO Status Command: input the command for I/O port status. For SMS feature, please keep
the parameter default.
Wifi on Command: input the command for turning on Wifi. For SMS feature, please keep the
parameter default.
Wifi off Command: input the command for turning off Wifi. For SMS feature, please keep the
parameter default.
Force Cellup Command: if cell is down since traffic limit, it can be brought up by this
command.
Operator List Command: send modem operator list as SMS, it is only supported by some
specific modems.
Operator set Command: set modem to operator manually, it is only supported by some
specific modems.
SMS alarm
"Router SN: 086412090002
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
"router cell status
checking" operation,
cell_link_up", which indicated the router
"router cell link
up" operation, default is
"router cell link
down" operation,
www.e-lins.com
H750 User Manual