Get Community: The username for SNMP get. The default value is public. SNMP get is
read-only.
Get Host/Lan: The network range to get the router via SNMP, default we set all as 0.0.0.0./0
Set Community: The username for SNMP set. The default value is private. SNMP set is
read-write.
Set Host/Lan: The network range to set the router via SNMP, default we set all as 0.0.0.0./0
User: SNMPv3 username
Security Mode: three options: None, private and Authorized. If it is set to None, there is no
password required. If it is set to Authorized, only Authentication method and password required.
Authentication: Authentication method, two options: MD5 and SHA.
Encryption: Encryption method, DES and AES supported.
Authentication password: SNMPv3 authentication password, at least 8 characters is required.
Encryption password: SNMPv3 encryption password, at least 8 characters is required.
After all items is setup, click button
"Save &
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
Apply" to enable SNMP functionality.
H750 User Manual
www.e-lins.com