Table of Contents
Advertisement
Options Available
Option 001 adds a fourth detector input (C).
Option 002 adds the power calibrator.
Option 001 and 002 adds
the front panel options table on the following page and the descriptions below it for more
detailed information on these options.)
Option 001, Fourth Detector Input
his option supplies four front-panel detector inputs (A, B, C,
and R).
Option 002, Internal Power Calibrator
his option supplies three front panel detector inputs (A,B,and R) and adds an internal power
calibrator. he power can be precisely controlled in 1 dB increments from +20 to
Option 908, Rack Mount Without Handles
his option supplies a rack mount kit containing a pair of
anges and the necessary hardware
to mount the analyzer (with handles
in) horizontal spacing. See chapter 2 for installation instructions.
Option 913, Rack Mount With Handles
his option supplies a rack mount kit containing a pair of
anges and the necessary hardware
to mount the analyzer (with handles
in) horizontal spacing. See chapter 2 for installation instructions.
the fourth detector input and the power calibrator. (See
both
Figure 1-3.
) in an equipment rack that has 482.6 mm (19
detached
) in an equipment rack that has 482.6 mm (19
attached
0
50 dBm.
General Information 1-7
Advertisement
Table of Contents
