Bosch SHE7PT55UC Operating Instructions Manual page 36

en-us Operating the Dishwasher
Terminating the wash cycle
(Reset)
Press and hold Start button P
1.
w a s h c y c l e T e r m i n a t i n g t h e
for approximately 3 seconds until
the display reads ‹:‹‚.
Wait about 1 minute while the
2.
dishwasher drains.
Press On/Off button (.
3.
You may now power the dishwasher
back on and begin a new cycle if
desired.
Changing the wash cycle
When the Start button ( has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
Child Lock (panel lock)*
The child lock will lock the panel
while the dishwasher is in operation
to prevent that a wash cycle is
interrupted unintenionally (e.g. by
children).
To set the panel lock:
Start the desired wash cycle.
1.
Hold down the button that says
2.
'Child Lock' underneath it for
approximately 3 seconds until the
display reads '–.
The panel lock is active.
'– will be indicated now if any button
is pressed and the program will not
be reset.
To deactivate the panel lock hold
down the button that says 'Child
Lock' underneath it for approximately
3 seconds until the display no longer
reads '–.
36
The panel lock is deactivated
automatically when the wash cycle is
completed. In case of a power
outage the panel lock will remain
active. The panel lock has to be
activated with each new wash cycle.
* optional feature which may or may
not be included with your
dishwasher.
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!)
This feature has two settings:
š:‹‹ Off
š:‹‚ On
Press On/Off button (.
1.
Hold down function key # and
2.
press Start button P until the
display 8 indicates •:x (x can
be any number).
Release both buttons.
3.
The indicator of function key #
flashes and the display 8
indicates the factory set value
•:‹...
Press function key # until the
4.
display 8 indicates the factory
set value š:‹‹.
Press function key 3 to switch
5.
the intensive drying feature on
š:‹‚ or off š:‹‹.
Press Start button P to save
6.
setting.