Inverter Specifications - Progressive Dynamics PD1610 Quick Reference Manual

Inverter Specifications

Installing the remote display on the wall
1. Place the template on the wall (See Figure 10).
2. Measure and mark the wall for the opening to be cut for re-
mote control.
3. Mark the corners of the recess outline on the wall.
4. Measure and mark the two mounting holes for the two
screws on the wall.
5. Cut along the recess outlines on the wall to make a hole for
the remote control.
6. Pre-drill the mounting holes appropriate for mount screws
(not provided) that will be used.
7. Connect the communication cable to the RJ9 port on the in-
verter and the remote control (see Figure 2).
8. Mount the remote panel unit on the wall.
Note:
Ensure that there are no
Obstructions present, such as:
- Pipes
- Insulation
- Electrical Wiring
Ensure that there is at least 1" (25.4 mm) of space for communication cable.
PHYSICAL SPECIFICATIONS
PD1610
L:11.2"(284mm)
Dimensions W:6.7"(170mm)
H:4.0"(101mm)
Net Weight 7 lbs (3.2 kg)
PD1610
Waveform
Output
Voltage
Max Power
1000W
(Cont)
Max Power
2000W
(Peak)
Frequency
Peak
Efficiency
Recommended GFCI for use with PD1610 Inverter:
Leviton GFTR2 (20A), Eaton SGF20 (20A), Bestten USP-20A-20-PKB (20A), Hongki TST20 (20A),
Zhangjiagang City Barep Technology Co. YGH-094 (20A),
Recommended GFCI for use with PD1618/20 Inverter:
Siemens QF130A (30A)
*All ratings at 25 °C unless otherwise listed
Consult a licensed electrician or RV technician for installation assistance
SPECIFICATIONS
PD1618 PD1620
L:15.0"(381mm) L:15.0"(381mm)
W:7.9"(200mm) W:7.9"(200mm)
H:4.0"(101mm) H:4.0" (101mm)
11 lbs (5.0 kg) 11 lbs (5.0 kg)
AC OUTPUT
PD1618 PD1620
Pure Sine Wave
120 VAC
1800W 2000W
3600W 4000W
60 Hz
90%
TRANSFER SWITCH
PD1610
Transfer Voltage
Transfer Time
Pass Through
20 AAC
Ampacity
PD1610
Nominal Voltage
Under-Voltage
Shutdown
Under-Voltage
Restart
Over-Voltage
Shutdown
Over-Voltage
Restart
Max Current @
100 ADC
max load
Figure 9
Mounting Diagram
PD1618
95 - 135 VAC
< 50 msec
30 AAC
DC INPUT
PD1618
12.0 VDC
10.5 VDC
12.0 VDC
15.5 VDC
15.0 VDC
180 ADC
814420H
PD1620
PD1620
200 ADC