Table of Contents
Advertisement
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of miles that the walk-
ing belt has moved. The information mode also allows
you to switch the console from miles per hour to kilo-
metres per hour. In addition, the information mode al-
lows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Time display will show
the total number of hours the
treadmill has been used.
The Distance display will
show the total number of
miles (or kilometres) that the
walking belt has moved.
An "E" for English or an "M"
for metric will appear in the
Speed display. Press the
Speed + button to change the
unit of measurement.
IMPORTANT: The Heart Rate display should be
blank. If a "d" appears in the display, the console is in
the "demo" mode. This mode is intended to be used
only when a treadmill is displayed in a store. Whilst the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate. If a "d" appears
in the Heart Rate display whilst the information
mode is selected, press the Speed – button so the
display is blank.
To exit the information mode, remove the key from the
console.
23
Advertisement
Table of Contents
