Amcrest IP2M-854EW User Manual page 12

6. Scan the QR code
the camera or manually enter the camera's serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
Note: Android users, tap on Scan QR Code to access the QR code reader.
8. The app will prompt you to change the password.
Enter a password between 8 and 32 characters and
confirm the password. Press OK to continue.
For more information about Amcrest View Pro and its functionalities visit
on the back/side/bottom of
7. Give the camera a name (e.g. Garage, Kitchen,
Living Room, etc.) and provide the username and
password for your camera. The default username and
will be admin. Tap Start Live View to continue.
Note: You can tap on the
password.
9. Your camera is now set up and ready for use on the
Amcrest View Pro app. For more information about
Amcrest View Pro and its functionalities visit
amcrest.com/support
amcrest.com/support
icon to verify the
12