Download Print this page

Installation - Haier HG1400TXVE Service Manual

Automatic drum washing machine

Advertisement

Matters Needing Attention
8. The washing machine should not be installed
outdoors or in a damp place. In the event of
water leakage or splashes allow the machine to
dry naturally.
10. Keep away from heat sources and direct
sunlight to prevent plastic and rubber components
from aging.Use the new hose and the old hose
should not be reused.
During Use
1. Before use, check the joints of the filling hose,
the tap and the drainage hose for possible
problems from water pressure fluctuations. If
joints are loose or there is leakage, turn off the
tap and repair. Do not use the washing machine
until the hoses are properly fixed.
9. Do not place the washing machine directly
on a carpet, or close to a wall or furniture.
If the appliance is supplied from a cord
extension set or electrical portable
outlet device the cord extension
set or electrical portable outlet
device should be positioned to
splashing or ingress of moisture.
11. During installation, ensure that the electric
cable is not trapped by the washing machine and
avoid damage to the electric cable. For built-in
appliance, the socket should be kept far away
from the solenoid valve.
2. To select a washing program, turn the knob
clockwise after the power is switched off.
When you close the door, please hold the
handle and lightly push the porthole shut.
Never force to close the door.

Advertisement

loading

This manual is also suitable for:

Hg1400txvemeHg1600txveHg1600txveme