Advertisement
Maintenance
1.Turn off the water tap and pull out electricity plug after each wash.
Open the porthole to prevent formation of moisture and odors. If the washing
machine is left idle for a long period, drain the water in the machine and replace
the drainage hose.
2. Unplug the machine during cleaning and maintenance
Use a soft cloth dampened with soap liquid to clean the machine case and rubber
components. Do not use organic chemicals or corrosive solvents.
3. Clean the detergent distribution drawer regularly.
For the detergent distribution drawer similar to the Figure, press out the
drawer first, then raise it slightly and pull it out. Flush it clean with water and
then replace it.
4. Clean the filter (once a month)
1) Pull out the bottom cover with both hands
(as shown in Fig.1);
2) Remove the filter by turning
counterclockwise (as shown in Fig.2);
3) Flush clean with running water;
4) Replace the filter by turning clockwise and
remount the cover.
Note: To ensure the bottom cover in place during
transportation, it fits tightly with the body. Use a flat
screwdriver to lightly loosen the cover first for the
first removals (as shown in Fig.3) and then remove it
with the hands (as shown in Fig.4).
.
Advertisement
