Advertisement
Maintenance
5
. To prevent blockage to the water supply by ingress
of foreign substances, clean the water inlet and inlet
filter regularly.
6
. If the machine is to be moved to a distant place, replace the vibration absorbing locks (packing
screws, rubber gaskets) removed before installation to prevent damage as shown below.
Insert the package supporting horizontally, turn it clockwise
Remove the back cover.
or counterclockwise 90 degree.
Insert the gasket and the bolt and
then tighten it
7
. If the washing machine is left idle for a long period,
pull out the electrical plug and turn off the water tap.
Open the door to prevent formation of moisture and
odors. Let the door open while not used.
Replace the back cover.
Advertisement
